In this mod guide I will show you how to modify the Nerf Vortex Proton. Although it has large ranges stock, you can still increase the range with this simple mod. First, unscrew the front barrel cover.
Then unscrew the rest of the gun.
Take out the three screws holding the disc propelling mechanism, then pull it out.
Take of the rubber piece with the spring.
Unscrew the silver spring securing screw.
Next, pull out the hammer pin. Move the spring’s end wire to the left, setting it in the mysteriously already there holder.(maybe Nerf wanted us to mod these guns?)
Put in the screw next to the spring, then Pull the hammer back into place, and reinsert the pin.
Push on the rubber cushion.
Put the whole assembly back into the gun and screw it down.
That’s it your done. If you have any questions please comment.